Affiliations

Civil 3D Apps‎ > ‎

SLO City Curbs

This subassembly inserts a curb, curb and gutters or sidewalk based on San Luis Obispo City Standards.

Curb and Gutter:

Curb 6” and 24” Gutter, Curb 8” and 24” Gutter, Curb 6” and 18” Gutter, Curb 8” and 18” Gutter
Curb:
Curb 8”, Curb 6”

With Integral Sidewalk

With Detached Sidewalk

With Boardwalk Sidewalk

Attachment

This subassembly may be attached at the FS for Curbs, Lip for Curb and Gutter and at the Back of Curb for Curbs and Curb and Gutter.

Input Parameters

Note: All dimensions are in feet unless otherwise noted.

Parameter

Description

Type

Default

Side

Specifies to insert the subassembly either on the right or the left side of the attachment point.

Left / Right

Right

Curb Type

Specifies the type of curb to be used.

Curb 6” and 24” Gutter

Curb 8” and 24” Gutter

Curb 6” and 18” Gutter

Curb 8” and 18” Gutter

Curb 6”

Curb 8”

Curb 6”

Attachment Point

Specifies the attachment point of the suabssembly

LipFS / Back

Lip or FS

Sidewalk Type

Specifies the type of sidewalk to be used.

Integral

Detached

Boardwalk

None

None

S/W Base Thickness

The base thickness under the sidewalk.

Numeric

0.33’

S/W Width

The width of the sidewalk.

Numeric

6’

Landscape Width

The width of the landscape area between the curb and sidewalk if a Detached Sidewalk is specified.

Numeric

3’

Target parameters

This section lists the parameters in this subassembly that can be mapped to one or more target objects, such as a surface, alignment, or profile object in a drawing. For more information, see in the AutoCAD Civil 3D User’s Guide Help.

Parameter

Type of Assignment

Status

Detached Sidewalk Offset

May be used to override the fixed landscape width if the sidewalk type is Detached.

Optional

Back of Sidewalk Offset

May be used to override the sidewalk width.

Optional

Output Parameters

None.

Behavior

This subassembly is intended to provide a way to model curbs, curb and gutters and optionally include a sidewalk. The slope of the sidewalk is 2% with a 4” thick sidewalk.

Layout Mode Operation

In layout mode the subassembly draws the subassembly based on the San Luis Obispo Standards.

Point, Link, and Shape Codes

The points, link and shape codes vary based on the type of subassembly shown.

Comments