Custom Reports
Average Slope Report
Does your local planner require an Average Slope Calculation based on contour length? Then this report is for you. It lets you select a surface and calculates the average slope of the surface. To find out more information check out this Blog Post.
directriz & rasante
In collaboration with Planvia, Portugal this app was developed to provide reporting information on the directions for alignments and profile elevations and slopes. The wording is in Portuguese, but can be translated into any desired language. Sample output of the reports may be found here:
The cost of the report is $100/seat and volume discounts are provided. The report is available in Civil 3D 2011 & 2012 and maybe available in prior versions of the software.
email me to purchase or with any questions you may have.
This plug-in can be used with AutoCAD Civil 3D 2012 to extract all of the surface boundaries contained within a drawing. The cost of the plug-in is $5/seat. Click the tile of the app to get more information.
Custom Subassemblies - vb.NET
Custom Bench Subassembly
This subassembly provides a way to meet the requirements of the International Building Code's requirements for benches. The subassembly allows you to target a profile for the first swale to provide the minimum slopes required. The subassembly has the capability to have two sized benches. One that is used once and then the other swale dimensions are repeated. More information, and how to purchase, may be found here: http://blog.civil3dreminders.com/2010/12/custom-bench-subassembly-updated.html
Custom Bench Subassembly - II
This subassembly works in much the same way as the original. Instead of using typical cross section slope, the subassembly calculates a slope necessary to produce the a 2:1 slope as measured between the contours. The cost of the subassembly is $100/seat.
Custom Subassemblies - Subassembly Composer
LaneOutsideSuperWithShoulder
This subassembly operates similar to the LaneOutsideSuper, but includes a shoulder. The subassembly has been created using Subassembly Composer 2012 and is editable. The shoulder slope utilizes the entered parameter or uses the superelevation slope of the shoulder if applicable. The cost of the subassembly is $25/seat or $250 with no per seat cost. The subassembly is created for use in the Imperial system of measurement. Email me for information on purchasing the subassembly.
Caltrans B3-1 & B3-2 Retaining Wall (Type 1)
This subassembly is created by using the CALTRANS Standard Plan (US Customary 2010) to model the
Caltrans B3-1 and B3-2 Retaining wall. The wall dimensions are stored in the subassembly and are accesed by using a profile to specify the height of the retaining wall. There is an option to have a B11-55 barrier at the top of the retaining wall.
More information regarding the subassembly may be found on it's help page.
The cost of the subassembly is $50/seat or $500 per site. Email me for information on purchasing the subassembly.
Caltrans B3-3 Retaining Wall (Type 1A)
This subassembly is created by using the CALTRANS Standard Plan (US Customary 2010) to model the Caltrans B3-3 Retaining wall. The wall dimensions are stored in the subassembly and are accesed by using a profile to specify the height of the retaining wall.
More information regarding the subassembly may be found on it's help page.
The cost of the subassembly is $50/seat or $500 per site. Email me for information on purchasing the subassembly.
Caltrans A87A Curbs
This subassembly is created by using the CALTRANS Standard Plan (US Customary 2010) to model the Caltrans A87A Curbs. The dimensions are stored in the subassembly so you don't have to worry about typing in the values. All of the curb types are available except for H. Need to quickly change from one type to another, this Subassembly makes it easy to do just that from AutoCAD Properties.
More information regarding the subassembly may be found on it's
help page. The cost of the subassembly is $25/seat or $250 per site.
Email me for information on purchasing the subassembly.
Caltrans A87B Hot Mix Asphalt Dikes
This subassembly is created by using the CALTRANS Standard Plan (US Customary 2010) to model the Caltrans A87B Hot Mix Asphalt Dikes. The dimensions are stored in the subassembly so you don't have to worry about typing in the values. Type A, C, D, E and F are included in the subassembly. Need to quickly change from one to the other, this Subassembly makes it easy to do just that from AutoCAD Properties.
More information regarding the subassembly may be found on it's
help page.
The cost of the subassembly is $25/seat or $250 per site. Email me for information on purchasing the subassembly.
San Luis Obispo City Curb, Curb and Gutter and Sidewalk
This subassembly is created by using the San Luis Obispo City Standard Plan to model curb, curb and gutter and sidewalks (Standards 4020, 4030, 4110, and 4140). The dimensions are stored in the subassembly so you don't have to worry about typing in the values. Need to quickly change from one to the other, this Subassembly makes it easy to do just that from AutoCAD Properties.
More information regarding the subassembly may be found on it's help page.
The cost of the subassembly is $25/seat or $250 per site. Email me for information on purchasing the subassembly.
Don't see a Civil 3D app here that you want? Then ask to see if one can be created for you by
emailing me.